Double Glazing Window Locks Repairs
Repairing double glazing window locks is essential to ensure the security of your home. Insecure handles or hinges could allow draughts into your property and leave your windows vulnerable to burglars.
Fortunately, it's not difficult to repair sluggish uPVC handles and locks without having to replace the door or window. Sometimes, cooling or lubricating your mechanism can help resolve any issues.
Broken Glass
Over time, double-glazing window locks can get worn down. As this happens, the handles can become hard to open or even lock shut. This could cause problems with ventilation in the home and also pose an issue for security. To correct this, it's crucial to repair the window as quickly as possible.
Double-glazed windows comprise two or more glass panes, with gas in between to provide insulation. Seals also hold the panes together. If double glazing Hanwell notice condensation between the glass panes it is likely that one of the seals must be replaced. This will typically involve replacing only one pane of the window and is much cheaper than replacing the entire window.
A blown seal in windows with double glazing usually results in condensation and cloudiness. This could be caused by a variety of causes, including air leaks or excessive moisture in the home. It's important to contact an expert in double glazing to fix the gas and seal in your double-glazed window as soon as you notice this issue.
It is possible to replace a single pane of double glazing glass, however, it is not recommended to do this without the assistance of a professional. This is due to the fact that it requires special tools and the right knowledge to complete the task safely. It is possible to damage the window frame, or your health if trying to do it yourself.
When a double-glazed windows is stuck, a lot of people use a crowbar in an attempt to open it. But, it usually results in the frame getting damaged and scratched. A specialist in window repairs can take the handle from your window and allow it to open without causing more damage. They can also change obsolete window mechanisms into more modern mechanisms.
Over time, the hinges on windows can become stiffer and more difficult to open, especially if the area is noisy. It's important to regularly lubricate your window hinges with silicone spray. Do not close the window using the handles or by closing it too tightly. This could cause damage to the hinges.
Broken Sash
This is a frequent problem with older double-glazed windows. It isn't easy to lock and open a window when the upper sash is not in of its pocket. This usually happens because the pins are not engaged or a balance shoe has been disconnected. Every sash is unique and therefore it is essential to know how yours is configured before you attempt to fix this.
This can be resolved by removing the sash, and then cleaning it thoroughly. This will reveal if it's still a good fit. If not, you'll need to install sash stops to help hold it in place. You can purchase them from many hardware stores or online. After cleaning the sash you can replace the parting beads and lubricate pulley axles using Teflon or silicon spray. Label the weights prior to removing them so you can reinstall them correctly.
Another common issue is a broken handle. Window handles can be difficult to spot, but there are some indicators that tell you if yours is broken. If the handle is spongy or stiff, or isn't solid, it's likely broken.
It could be due to lack of use or the handle could have broken or become detached. In certain cases the handle may be damaged inside and unable to be repaired, but it's still worth trying to fix it as soon as you notice the issue.
You may have to unscrew the hinges that connect the window sash to the frame in order to take it off. This is a difficult task, so it's essential to have someone with you to help hold the sash and keep it in place. After removing the hinges it is essential to clean them and the surrounding areas. Reattaching the hinges is also an excellent idea. You can test the handle to see if it works properly. If it's not, you may want to consider replacing it. This will ensure that your window is as safe as it can be.
Broken Handle
The window handle is a delicate piece with intricate mechanisms, and it's common for them to degrade or break as time passes. As such, it's essential that damaged handles are repaired as soon as possible to avoid lack of functionality and security issues.
It is, however, easy to change a window handle. Unlike a sash, which requires multiple bolts to secure, a window handle is secured using one or two screws which makes it a straightforward DIY task for anyone with a little of knowledge. After the new handle is installed, it is important to test it to make sure the mechanisms are operating properly. This includes locking the handle and looking for holes which could allow drafts be able to enter your home, or allow burglars to gain access.
The most common cause of the broken handle on a window is simply wear and tear resulting from regular use. A damaged handle could also be caused by excessive stress or force. A window that is smashed or forced open can cause additional strain on the handle, which can increase the chance of damage, therefore it is always recommended to complete any handling tasks slowly and gently.
Other causes of a damaged hand include inadequate maintenance or aging, or design issues. Inadequate cleaning and lubrication could cause the handle to wear out early, which is usually due to dirt or debris that builds up over time. Additionally the handle may be damaged by improper installation and alignment problems.
If the fixes previously mentioned don't work and the tasker isn't able to solve the issue, the Tasker might need to gain access to and remove the lock mechanism itself. This may involve taking out the window frame or removing the plastic bead and frame (to give more space). The new lock will then be adjusted to match the profile of the uPVC handle. The new handle will be re-attached and the process can be completed. Tasker will provide you with an estimate of the cost of the repair in the event that this is the case.
Lock is faulty Lock
If window locks are damaged, it's important to fix the issue as soon as you can. This is because a damaged window can lead to draughts and weaken home security barriers, leaving the home vulnerable to burglary. Window lock repairs are generally small, but it's recommended to contact an expert before the issue becomes more severe and costs you more money.
UPVC window handles are available in two different styles including cockspur handles as well as espagnolette handles. The former uses a centre rod to operate the mushroom-like locking cams, which lock into window frame keeps. The cams of the lock are activated by a handle that is attached to the spindle. The latch of the lock clips into the mortise and is able to catch a window frame.
Both kinds of UPVC windows locks are at risk to damage, especially in older homes. This can happen if the sash becomes warped or misaligned, or even becomes loose. In these situations the lock should be reinstalled to prevent draughts and loss of energy efficiency. A Tasker will replace the damaged locks for you and provide peace of mind knowing your windows are secure from burglars.
The first thing a Tasker does to fix your double glazing window lock is examine it and determine the issue. Once they have all the data they need, they will get their tools set and arrive at your house. They'll typically bring a Phillips-head screwdriver, needle-nose pliers wood putty and fine-grit paper.
If the sash is misaligned the Tasker will have to loosen the screws securing both pieces of the lock to the window frame. Then, they'll remove the latch and fill the mounting holes with wood putty (if necessary) and sand the area until it's level with the rest of the window frame.
If the lock is rusted they'll clean it using wire brush or oil, and then lubricate it with grease to keep it running smoothly. They'll also make sure that the latch is in good condition and re-install it.